Measuring a roof from the ground is easier than it sounds. Take the outside length and width of the house, add the eaves overhang on each side, and the pitch turns that flat plan into the sloping area you actually paint. Sheet roofs have more surface again, because the ribs and corrugations fold more metal into each metre.
How the calculator works it out
- Plan area: the footprint plus the eaves overhang on every side, as the roof looks from above.
- Roof area: the plan area divided by the cosine of the pitch. At 26° a roof is about 11% bigger than its plan; at 45° about 41% bigger. This holds for hipped and gable roofs alike.
- Surface to coat: tiles count as flat. IBR sheets are rolled from 925 mm wide steel to cover 686 mm, so they have about 1.35 times the surface; corrugated sheets about 1.13 times.
- Paint: surface times the coats, divided by the spread rate. Roof paints state about 7 m² per litre per coat; enter the figure on your tin if it differs.
- Contractor: a South African cost guide puts roof painting at about R50 to R100 per m² of roof with the paint included, before repairs.
Tin prices are South African retail listings and labour rates come from two South African cost-guide portals, all checked in November 2026. Painters and shops set their own prices, VAT is not always stated and prices change often. Use the figures to spot a quote that is far out, not as a price.
Before the roof is painted
- Have it cleaned: pressure washing takes off moss, lichen and loose old coating, then the roof must dry.
- Fix the leaks first: cracked or slipped tiles, ridge and hip pointing, flashings, rusted screws and sheets.
- Choose the paint for the covering: an acrylic roof paint for tiles, and a metal system for sheeting. Light, heat reflecting colours keep the roof space cooler.
- Paint in dry weather with no rain forecast for the drying time on the tin, and not on a hot roof in the midday sun.
Read more on roof painting and roof paint, and for a flat roof use the waterproofing calculator.
