Waterproofing is measured on the whole area the water reaches, so the membrane turns up the parapets and walls around a flat roof as well as covering the slab. Rolls also overlap, so a 10 m² roll covers less than 10 m². This calculator allows for both and gives the material and a rough installed price from published South African figures.
How the calculator works it out
- Area: the flat area plus the upstands, the length of the walls or parapets times the height the membrane turns up. Upstands are often at least 150 mm; the system's specification decides.
- Torch-on: 1 × 10 m rolls overlapped 100 mm at the sides and 150 mm at the ends, as membrane makers' installation sheets ask, so each roll covers about 8.9 m². A 4 mm roll costs about R1,650 and installed torch-on about R300 to R500 per m².
- Liquid waterproofing: about 1.5 to 2.5 L per m² over all the coats, from South African data sheets, in 20 L tins of about R1,050 to R1,900. The fibre membrane comes in 5 m² rolls at about R470. Cost guides put liquid applied systems at about R250 to R700 per m² installed.
Tin prices are South African retail listings and labour rates come from two South African cost-guide portals, all checked in November 2026. Painters and shops set their own prices, VAT is not always stated and prices change often. Use the figures to spot a quote that is far out, not as a price.
Which system suits the job
- Torch-on suits flat concrete roofs and large slabs. It is fast to lay and tough, but needs a trained contractor and a gas torch, and a top coat of reflective paint where it is not mineral finished.
- Liquid waterproofing with fibre suits balconies, parapets, small roofs, gutters and awkward details, and can be done by a careful DIYer in dry weather.
- Either way, the work starts with the cause: blocked outlets, cracked screeds, failed flashings and missing falls.
More on waterproofing, waterproofing membranes and waterproof paint.
